User Manual
Table Of Contents
- Table of Contents
- Proprietary Statement
- Declaration of Conformity
- Warranty Information
- Preface
- Introduction
- Printer Setup
- Printer Operation
- Configuration
- RFID Guidelines
- Routine Care and Adjustments
- Troubleshooting
- Data Connections
- Specifications
- Index
Printer Operation
Front Panel
R4Mplus User Guide 21
Front Panel Keys
Table 4 • Front Panel Keys
Key Function
FEED Forces the printer to feed one blank label each time the key is pressed.
Printer not printing: one blank label immediately feeds.
Printing: one blank label feeds after the current batch of labels is complete.
PAUSE Starts and stops the printing process.
Printer not printing: no printing occurs. (Press PAUSE again to resume printing.)
Printing: printing stops after the current label is complete.
CANCEL Cancels print jobs when in the pause mode.
Printer not printing: the next stored label format does not print.
Printing: current label completes printing and the next label format is cancelled.
Press and hold for several seconds to cancel all print jobs in memory.
SETUP/EXIT Enters and exits the configuration mode.
SELECT Toggles the function of PLUS (+) and MINUS (–) between the Scroll and Change
Modes.
Press once to use PLUS (+) and MINUS (–) to change the values of the selection.
Press again to use PLUS (+) and MINUS (–) to scroll through the menu items.
PLUS (+)
(scroll mode)
Scrolls to the next selection.
PLUS (+)
(change mode)
Increases the value.
Answers yes.
Prints a label (when applicable).
MINUS (–)
(scroll mode)
Scrolls to the previous selection.
MINUS (–)
(change mode)
Decreases the value.
Selects the digit you wish to change.
Answers no.