User Manual
Table Of Contents
- Table of Contents
- Proprietary Statement
- Declaration of Conformity
- Warranty Information
- Preface
- Introduction
- Printer Setup
- Printer Operation
- Configuration
- RFID Guidelines
- Routine Care and Adjustments
- Troubleshooting
- Data Connections
- Specifications
- Index
Introduction
Front Panel
R4Mplus User Guide 5
Print Modes
You can view the current print mode on the LCD on the front panel of the printer. Refer to
Configuration and Calibration LCD Displays on page 49 for more detailed information. Print
modes should match the media and printer options chosen. Print mode choices are listed in
Table 2.
Table 2• Print Mode Options
Mode Printer Option Action
Tear-Off Mode
(Default setting)
Use for most applications. Each label or strip of labels can be torn
off after printing.
Peel-Off Mode Use only if printer has the peel option. Liner material is peeled away from the
label as it is printed. After the printed
label is removed the next label prints.
Cutter Mode Use only if printer has a cutter option. Printer automatically cuts the label after
it is printed.
Rewind Mode Use only if printer has the rewind
option.
The media and/or liner are rewound
onto a core as they are printed.