User Manual

Table Of Contents
4 R4Mplus User Guide
Introduction
Front Panel
LCD Display Settings
Table 1 shows the front panel LCD display settings that you may wish to adjust and what they
mean. Refer to Basic Configuration on page 46 for more detailed information.
Table 1 • Front Panel LCD Display Settings
LCD Display Meaning/Available Settings
PRINTER READY Ready to print labels or to configure the printer. All printer
self-tests have been performed successfully.
DARKNESS The larger the number, the darker the print. The range is
0 to 30, with a default setting of 10.
PRINT SPEED The print speed is given in inches per second. The larger the
number, the faster the label prints.
TEAR OFF Establishes the position of the media over the tear-off bar after
printing.
PRINT MODE Tear-Off (default setting), Peel-Off, Cutter, Rewind. For more
details, see Table 2.
MEDIA TYPE Non-continuous (default setting), Continuous
SENSOR TYPE Web (default setting), Mark
SENSOR SELECT Auto Select (default setting), Transmissive
PRINT METHOD Thermal transfer (default setting using a ribbon),
Direct thermal (no ribbon)