User Manual

112 R4Mplus User Guide
Specifications
Media Specifications
Media Specifications
Table 22 • R4Mplus Media Specifications
Media Specifications
Label length Minimum Tear-off 0.5 in. 13 mm
Peel-off 1 in. 25.4 mm
Rewind 0.5 in. 13 mm
“Smart” labels Minimum label length for RFID “smart” labels
varies for each transponder type. For the list of
approved transponders and related placement
specifications, go to
http://www.rfid.zebra.com/r4m.htm.
Maximum 39 in. 991 mm
Label width Minimum Tear/Peel/Rewind 1 in. 25.4 mm
“Smart” labels Minimum label width for RFID “smart” labels
varies for each transponder type. For the list of
approved transponders and related placement
specifications, go to
http://www.rfid.zebra.com/r4m.htm.
Maximum Tear 4.5 in. 114 mm
Peel/Rewind 4.25 in. 108 mm
Total thickness
(includes liner, if any)
Minimum 0.0023 in. 0.058 mm
Maximum 0.010 in. 0.25 mm
Core size 3 in. 76 mm
Maximum roll diameter 8 in. 203 mm
Inter-label gap Minimum 0.079 in. 2 mm
Preferred 0.118 in. 3 mm
Maximum 0.157 in. 4 mm
Ticket/tag notch size (width x length) 0.236 in. × 0.12 in. 6 mm × 3 mm
Hole diameter 0.125 in. 3 mm