User's Manual Part 1

P4T/RP4T User Guide
30
Printer Preparation
Connecting the
Printer
Radio Regulatory
Information
RP4T Printers
Maintenance Troubleshooting Specifications Appendices Index
P4T Overview
Manual
Introduction
RFID Encoder
ThefollowingsectiononlyapplieswhentheRFIDencoderisin-
stalledinanRP4Tprinter.TheRFIDencodermaybeinstalledincon-
junctionwitheithertheBluetoothor802.11gradiooptionsdetailed
previously, but may not be installed with the Bluetooth/802.11g
dual radio option.
P4T Series printers will have the fth character of the Product
CongurationCode(PCC)perthefollowingtable:
RFID option PCC digit “4” Printer Model
No RFID 0 P4T
US 1 RP4T
EU 2 RP4T
Japan 3 RP4T
China 4 RP4T
Korea 5 RP4T
UnitsbuiltfortheNorthAmericanregionwillalsohavethe(FCC
ID:TBD)onalabelonthebackoftheunit.
Caution • Use of a RP4T printer with the RFID Encoder
markedwithFCCID:TBDmeetstheFCCrequirementsfor
radio frequency (RF) radiation exposure in the standard
bodyworncongurationwithnominimumseparation.In
thiscongurationthefaceoftheprinterfromwhichpaper
is transported is facing away from the user’s body. The
standard conguration must always be used when the
printerisbodyworn.
 The RP4T printer with this radio option has been
SAR tested. The maximum SAR value measured is:
TBDW/Kg(1gaverage