User's Manual Part 1
P4T/RP4T
User Guide
27
Printer Preparation
Connecting the
Printer
Radio Regulatory
Information
RP4T Printers
Maintenance Troubleshooting Specifications Appendices Index
P4T Overview
Manual
Introduction
Bluetooth ZBR4 Radio
Caution • ExposuretoRadioFrequencyRadiation.
TheradiatedoutputpowerofthisinternalBluetoothradio
isfarbelowtheFCCradiofrequencyexposurelimits.The
internalBluetoothradiooperateswithinguidelinesfound
inradiofrequencysafetystandardsandrecommendations.
Donotusetheprinterinanunauthorizedmanner.
Note • The following section only applies when the
TBD-ZBR4BluetoothRadio(TBD)isinstalledinaP4TSeries
printer. Unless specied elsewhere in this manual, the
antennausedforthistransmittermustnotbeco-locatedor
mustnotoperateinconjunctionwithanyotherantenna.
EuropeanRegulatoryInformationfortheTBD-ZBR4BluetoothRadio
This device is intended for use in all EU and EFTA member states.
Europe–EUDeclarationofConformity
ThisdevicecomplieswiththeessentialrequirementsoftheR&TTEDirective
1999/5/EC.Thefollowingtestmethodshavebeenappliedinordertoprove
presumptionofcompliancewiththeR&TTEDirective1999/5/EC:
•EN60950:2000SafetyofInformationTechnologyEquipment
•EN300328-2V1.4.1(2003-04)Technicalrequirementsforspread-spectrum
radio equipment
•EN301489-1/-17V1.4.1/1.2.1(2002-08)EMCrequirementsforspread-
spectrum radio equipment.
Thisdeviceisa2.4GHzwirelessLANtransceiver,intendedforindoorhomeand
office use in all EU and EFTA member states.
WLAN Module Using 802.11b/g Radio
The following section only applies when the 802.11b/g WLAN module (FCC ID: TBD) is
installed in a P4T Series printer). Other than conditions specified elsewhere in this manual,
only one of the radio options can be installed in the printer at one time and the antenna
used for these transmitters must not be co-located or must not operate in conjunction
with any other antenna.
P4T Series models have the FCC ID number on a label on the back of the unit.
Caution•UseofaP4TSeriesprinterwiththeradiomodule
markedwithFCCID:TBDmeetstheFCCrequirementsfor
radio frequency (RF) radiation exposure in the standard
bodyworncongurationwithnominimumseparation.In
thisconguration,whichapplieswhetherthebeltclipor
shoulderstrapisused,thefaceoftheprinterfromwhich
paperistransportedisfacingawayfromtheuser’sbody.
Thestandardcongurationmustalwaysbeusedwhenthe
printerisbodyworn.
The P4T Series printer with this radio option has been
SAR tested. The maximum SAR value measured is:
TBDW/Kg(1gaverage
EuropeanRegulatoryInformationforthisRadio
AT BE CY CZ DK
EE FI FR DE GR
HU IE IT LV LT
LU MT NL PL PT
SK SI ES SE GB
Note: -Member states in the EU with restrictive use for this device are
crossed out!
ThisdeviceisalsoauthorizedforuseinallEFTAmemberstates(CH, IS, LI, NO)
Important Notice:
This device is a portable RF printer intended
for commercial and industrial use in all EU
and EFTA member states.
0336
Important Notice:
This device is a portable RF printer
intended for commercial and industrial use
in all EU and EFTA member states except in
France where restrictive use applies
Radio Regulatory Information
Section Continues