User's Manual
Table Of Contents
- Table of Contents
- Printer Software and Firmware License Agreement
- Warranty Information
- Preface
- Introduction
- Printer Setup
- Printer Operation
- Print Modes
- Configuration
- RFID Guidelines
- Data Ports
- Memory Cards
- Routine Maintenance
- Troubleshooting
- Specifications
- Index
Printer Setup
Communication Interfaces
R110/R170XiIIIPlus User Guide 13
Communication Interfaces
The way that you connect your printer to a data source depends on the communication options
installed in the printer. The standard communication interfaces are an RS-232 serial data port,
a bi-directional parallel port, and a USB 2.0 port.
The following illustration shows the location of the communication interfaces on the back of
the printer. For more information about these interfaces, see
Data Ports on page 53.
Other options for connecting your printer to a data source include the following:
• The optional ZebraNet
®
PrintServer II, which enables the printer to be connected to
10Base-T Ethernet networks.
• A wireless card socket option.
•The IBM
®
Twinax or IBM
®
Coax option for those applications that require them.
Note • RS-422 and RS-485 serial data ports are available through an adapter. A DB-25 cable
and a USB 2.0 cable are also available.
1
Parallel port
2
Serial port
3
USB 2.0 port
1
2
3