User's Manual

150 R110/R170XiIIIPlus User Guide
Specifications
Label Specifications
R170 Xi III Plus Black Mark Sensing Only
Preferred inter-label gap Maximum inter-label gap = 2 × (label length for
which you have calibrated the printer) + 1 in.
(25.4 mm)
Maximum internal fanfold media pack size (label +
backing) L×W×H
8.0×7.1×4.5 in.
(203×114×114 mm)
Ticket/tag sensing notch L×W 0.12×0.25 in.(3×6 mm)
Ticket/tag sensing hole diameter 0.125 in.(3 mm)
Effective leading edge registration accuracy
(vertical)
± 0.060 in. (± 1.5 mm)
Effective leading edge registration accuracy
(horizontal)
± 0.060 in. (± 1.5 mm)
Specifications R170Xi IIIPlus
Mark length (measuring parallel to label or
tag edge)
0.12 in. (3 mm)

0.43 in. (11 mm)

Mark width (measuring to perpendicular label or
tag edge)
0.43 in. (11 mm)

Full media width

Mark location Marks must be located within 0.040 in. (1 mm) of
the inside media edge.
Mark density in Optical Density Unit (ODU) >1.0
Specifications R170Xi IIIPlus