User's Manual

142 R110/R170XiIIIPlus User Guide
Specifications
Print Specifications by Model
Print Specifications by Model
Refer to the key and the tables that follow for printer specifications.
Model Specifications Key
This table contains the key for print specifications for the tables that follow.
R110 Xi III Plus

Non-Continuous printing (gap, notch, or hole between labels).

Continuous printing (no gap, notch or hole).

Ladder (rotated) orientation.

Picket fence (nonrotated) orientation.
Specification R110Xi IIIPlus
200 dpi
R110XiIIIPlus
300 dpi
R110XiIIIPlus
600 dpi
Printhead resolution 203 dots/inch
(8 dots/mm)
300 dots/inch
(12 dots/mm)
600 dots/inch
(24 dots/mm)
Dot size
(width×length)
0.0049×0.0049 in.
(0.125×0.125 mm)
0.0033×0.0039 in.
(0.84×0.100 mm)
0.0016×0.0016 in.
(0.042×0.042 mm)
First dot location
(measured from inside
media edge)
0.10 ± 0.035 in.
(2.5 ± 0.89 mm)
0.023 ± 0.035 in.
(0.6 ± 0.9 mm)
0.023 ± 0.035 in.
(0.6 ± 0.9 mm)
Maximum print width 4.09 in. (104 mm) 4.09 in. (104 mm) 3.2 in. (81 mm)
Selectable print speeds
(inches per second)
2.4, 3 through 10 2.4, 3 through 8 1.5, 2 through 4
Maximum Print length 39 in. (991 mm)

150 in. (3810 mm)

39 in. (991 mm)

100 in. (3810 mm)

39 in. (991 mm)

39 in. (991 mm)

Bar code modulus (X)
dimension
4.9 mil to 49 mil
4.9 mil to 49 mil
3.9 mil to 39 mil

3.33 mil to 33 mil
1.6 mil to 16 mil
1.6 mil to 16 mil
Thin film printhead with
Element Energy
Equalizer (E
3
)
®
Yes Yes Yes