User Manual

144 R110/R170XiIIIPlus User Guide
Specifications
Ribbon Specifications by Model
Ribbon Specifications by Model
Refer to the tables that follow for ribbon specifications for your type of printer.
R110 Xi III Plus
Note • Match the ribbon to the label width and printhead width that you are using.
• Ribbon must be wound with the coated side out.
• Ribbon should be at least as wide as the labels to protect the printhead from excessive
wear.
Specifications R110XiIIIPlus
200 dpi
R110XiIIIPlus
300 dpi
R110XiIIIPlus
600 dpi
Printhead resolution 203 dots/inch
(8 dots/mm)
300 dots/inch
(12 dots/mm)
600 dots/inch
(24 dots/mm)
Ribbon width Minimum 0.79 in. (20 mm) 0.79 in. (20 mm) 0.79 in. (20 mm)
Ribbon width Maximum
4.33 in. (110 mm) 4.33 in. (110 mm) 3.40 in. (87 mm)
Standard length with 2:1
label to ribbon ratio
984 ft (300 m) 984 ft (300 m) 984 ft (300 m)
Standard length with 3:1
label to ribbon ratio
1476 ft (450 m) 1476 ft (450 m) 1476 ft (450 m)
Ribbon core inside
diameter
1.0 in. (25.4 mm) 1.0 in. (25.4 mm) 1.0 in. (25.4 mm)
Maximum ribbon roll
outside diameter
3.2 in. (81.3 mm) 3.2 in. (81.3 mm) 3.2 in. (81.3 mm)