User Manual

Configuration
Configuration and Calibration LCD Displays
R110/R170XiIIIPlus User Guide 75
IDLE DISPLAY Idle Display
This parameter selects the LCD options for the real-time clock.
Note • If the default value is not selected, pressing either oval briefly displays the
firmware version of the printer.
• Press the right or left oval to display other choices.
Default: Firmware version
Selections: mm/dd/yy (24 hour), mm/dd/yy (12 hour), dd/mm/yy (24 hour),
dd/mm/yy (12 hour)
RTC DATE RTC (Real-time clock) Date
This parameter allows you to set the date following the convention selected in IDLE
DISPLAY.
1. Press the left oval to move to the next digit position.
2. Press the right oval to increase the value of the digit.
RTC TIME RTC (Real-time clock) Time
This parameter allows you to set the time following the convention selected in IDLE
DISPLAY.
1. Press the left oval to move to the next digit position.
2. Press the right oval to increase the value of the digit.
LANGUAGE Selecting the Display Language
This parameter allows you to change the language used on the LCD.
• Press the right or left oval to display other choices.
Default: English
Selections: English, Spanish, French, German, Italian, Norwegian, Portuguese,
Swedish, Danish, Spanish 2, Dutch, Finnish, Japanese
Table 1• Front Panel LCD Messages (Page 19 of 19)
LCD Description