User Manual
Table Of Contents
- Contents
- Proprietary Statement
- Warranty Information
- Printer Software andFirmware LicenseAgreement
- Preface
- Introduction
- Printer Setup
- Printer Operation
- Front Panel Controls
Printer Operation
Adjust Printhead Pressure and Toggle Position
23063L-001 Rev. 1 6/7/2004 RXiIIIPlus User Guide 39
Figure 28 • Toggle Assemblies
4. Some media types require higher pressure to print well. For these media types, increase or
decrease pressure using the adjusting nuts until the left and right edges of the printed area
are equally dark.
5. Increase the darkness level using the front panel controls until the printing is clear.
6. Tighten the locking nuts.
1
Locking nuts
2
Adjusting nuts
2
1