User's Manual
Table Of Contents
- Table of Contents
- Printer Software and Firmware License Agreement
- Warranty Information
- Preface
- Introduction
- Printer Setup
- Printer Operation
- Print Modes
- Configuration
- RFID Guidelines
- Data Ports
- Memory Cards
- Routine Maintenance
- Troubleshooting
- Specifications
- Index
146 R110/R170XiIIIPlus User Guide
Specifications
Label Specifications
Label Specifications
RXiIIIPlus printers need the correct size and type of labels for best performance. The tables
that follow give you the specifications you need.
R110XiIIIPlus Printers
Label Specification Key
This table contains the key for the label modes, dimensions, and directions:
Important • Media registration and minimum label length are affected by label type and
width, ribbon type, print speed, and printer mode of operation. Performance improves as
these factors are optimized. Zebra recommends qualifying any application with thorough
testing.
T
Tear-Off
P
Peel-Off
C
Cutter
R
Rewind
Minimum
Maximum
Preferred
Specifications R110XiIIIPlus
200 dpi
R110XiIIIPlus
300 dpi
R110XiIIIPlus
600 dpi
Minimum label length 0.7 in. (18 mm) T 0.7 in. (18 mm) T 0.7 in. (18 mm) T
0.5 in. (13 mm) P 0.5 in. (13 mm) P 0.5 in. (13 mm) P
1.5 in. (38 mm) C 1.5 in. (38 mm) C 1.5 in. (38 mm) C
0.25 in. (6 mm) R 0.25 in. (6 mm) R 0.25 in. (6 mm) R
Total media width (label
+ backing,
if any)
0.79 in. (20 mm)
4.5 in. (114 mm)
0.79 in. (20 mm)
4.5 in. (114 mm)
0.79 in. (20 mm)
4.5 in. (114 mm)
Total thickness (includes
backing,
if any)
0.003 in. (0.076 mm)
0.012 in. (0.305 mm)
0.003 in. (0.076 mm)
0.012 in. (0.305 mm)
0.003 in. (0.076 mm)
0.012 in. (0.305 mm)