User's Manual Part 2

RFID Guidelines
^RN
58981L-002 Rev. 1 2/11/05 R110PAX4 User Guide 105
^RN
Detect Multiple RFID Tags in Encoding Field
Description This command enables or disables detection of multiple RFID tags in the
encoding field. By default, the printer checks for more than one tag in the field before
attempting to read or write. If more than one tag is found, the label over the antenna support is
voided, and the
RFID ERR STATUS parameter on the front panel displays
MULTIPLE TAGS. To speed up printing and encoding by up to 200 ms, the check may be
disabled. This parameter is not persistent (carried over from label to label).
Format
^RNe
The following table identifies the parameters for this format.
Parameters Details
e = enable Accepted Values: Y (Yes, check for multiple tags), N (No, do not check for
multiple tags)
Default Value: Y