User's Manual Part 2

Print Engine Operation
Load Media
58981L-002 Rev. 1 2/11/05 R110PAX4 User Guide 37
13. See Figure 26. Thread the media liner around the peel bar, under the media liner roller,
and through the peel roller assembly.
Figure 26 • Threading the Liner
14. See Figure 27. Rotate the peel roller assembly up until it locks into the closed position.
Figure 27 • Closed Peel Roller Assembly
15. See Figure 26. Thread the media liner past the lower guide post and around the take-up
spindle of the applicator (refer to the applicator’s user guide).
16. Close the media door.
Note • If the applicator has an air tube, route the media liner between the air tube and the
peel bar. Do not thread the media liner over the air tube.
1
Lower guide post
2
Peel bar
3
Media liner roller
4
Peel roller assembly
2 3
4
1