User's Manual Part 2

36 R110PAX4 User Guide 58981L-002 Rev. 1 2/11/05
Print Engine Operation
Load Media
8. See Figure 24. Position the media so that it is aligned with and just touching the inner
media guide.
9. See Figure 24. Position the outer media guide so that it just touches the outer edge of the
media.
Figure 24 • Adjusting the Outer Media Guide
10. See Figure 20 on page 33. Press down on the pinch roller assembly until it locks closed.
11. See Figure 22 on page 34. Close the printhead assembly by rotating the printhead latch
until it latches onto the locking pin.
12. See Figure 25. Raise the peel roller latch so that the peel roller assembly pivots down.
Figure 25 • Releasing the Peel Roller Assembly
1
Inner media guide
2
Outer media guide
3
Media
1
Peel roller latch
2
Peel roller assembly
1
2
3
1
2