User's Manual Part 2

Print Engine Operation
Load Media
58981L-002 Rev. 1 2/11/05 R110PAX4 User Guide 35
6. See Figure 23. Thread the media under the upper guide post, below the pinch roller
assembly, and under the printhead assembly.
7. See Figure 23. Extend approximately 30 in. (75 cm) of media past the peel bar. Remove
and discard the labels from this exposed media.
Figure 23 • Threading the Media
1
Upper guide post
2
Pinch roller assembly
3
Printhead assembly
4
Label
5
Liner
1 2
3
4
5