User's Manual Part 2

Print Engine Configuration
Print a Network Configuration Label
58981L-002 Rev. 1 2/11/05 R110PAX4 User Guide 53
Print a Network Configuration Label
If you are using a print server, you can print a network configuration label after the print
engine is connected to the network.
To print a network configuration label, complete these steps:
1. On the front panel, press SETUP/EXIT.
2. Press NEXT or PREVIOUS to scroll through the parameters until you reach
LIST NETWORK.
3. Press the right oval to confirm printing.
A network configuration label prints (Figure 39). An asterisk designates whether the
wired or wireless print server is active. If no wireless print server is installed, the wireless
portion of the label does not print.
Figure 39 • Network Configuration Label (With a Wireless Print Server Installed)