User's Manual Part 2
190 R110PAX4 User Guide 58981L-002 Rev. 1 2/11/05
Index
setup checklist, 14
Setup mode
enter Setup mode, 50
exit Setup mode, 51
LCD messages, 55
passwords, 54
SETUP/EXIT button description, 9
shipping
report damage, 15
reshipping the print engine, 15
short calibration, 44
“smart” labels, 28
specifications
bar codes, 152
communications options, 151
electrical, 151
environmental conditions, 150
fuses, 151
media, 154
memory, 151
physical, 150
power cord, 23
printing, 153
ribbon, 155
Zebra Programming Language (ZPL), 152
specify number of retries for block (^RR), 108
specify RFID tag type, 79
standard data ports, 157
start print signal setting, 70
storing the print engine, 15
subnet mask, 74
support, 3
system considerations
communication specifications, 25
communications code, 25
interfaces, 25
T
Tear-Off mode
tear-off bar cleaning, 122
tear-off position adjustment, 56
temperature requirements, 150
thermal transfer mode
media scratch test, 29
setting, 57
time setting, 73
toggle positioning, 127
top of label
printer cannot detect, 140
setting, 68
transmissive (media) sensor
adjusting, 46
when to clean, 122
transponders
calibrate from front panel, 77
calibration using ZPL (^HR), 96
characteristics of different types, 85
placement in labels, 83
selecting type, 85
setting tag type, 85
when to calibrate, 85
troubleshooting
checklist, 132
communications problems, 139
diagnostic tests, 142
LCD error messages, 133
print quality problems, 136
types of media
continuous roll media, 27
fanfold media, 28
non-continuous roll media, 27
RFID “smart” labels, 28
U
unpack the print engine, 15
V
verify RFID write operation (^WV), 119
W
web media, 27
setting sensor type, 57
Web S. setting, 71
Wireless Print Server settings
authentication type, 75
default gateway, 75
encryption, 75
ESSID, 75
IP address, 74
IP protocol, 74
MAC address, 75
reset network, 75
subnet mask, 74
write power
change through front panel, 77
change using ZPL, 115
write RFID format (^RF), 102
write RFID tag (^WT), 117