User's Manual Part 2

188 R110PAX4 User Guide 58981L-002 Rev. 1 2/11/05
Index
P
parallel port
pin configuration, 158
setting parallel communications, 63
settings, 158
parity setting, 64
passwords
default, 54
disable, 54
entering, 54
RFID tag password, 116
Pause mode
PAUSE button, 9
PAUSE LED, 10
PAUSE self test, 144
PCMCIA card initialization, 61
peel-off bar cleaning, 122
pin configuration
applicator interface, 168
parallel port, 158
serial port, 160
platen roller
cleaning, 125
when to clean, 122
ports, 157
power
connect to power source, 22
electrical specifications, 151
on/off switch location, 12
power cord specifications, 23
Power-On Self Test (POST), 142
PREVIOUS button description, 9
print configuration label
CANCEL self test, 143
List Setup command, 60
print darkness setting, 55
print engine setup
before you begin, 14
installation, 16
unpack the print engine, 15
print modes, 56
print network configuration label, 53, , 60
print quality troubleshooting, 136
print server settings
default gateway, 75
IP address, 74
IP protocol, 74
subnet mask, 74
print width setting, 57
printer settings
applicator port, 69
backfeed, 68
baud, 64
calibration methods, 44
control prefix, 66
data bits, 64
date, 72
delimiter character, 66
format convert, 72
format prefix, 66
head resistor, 69
host handshake, 64
idle display, 72
IP settings, 74
label top, 68
language, 73
LCD, 71
left position, 68
maximum label length, 58
media type, 56
network configuration label as baseline, 53
network ID, 65
parallel communications, 63
parity, 64
print darkness, 55
print method, 57
print server settings, 74
print width, 57
protocol, 65
resynch mode, 70
RFID settings, 76
RFID tag type, 79
saving, 51
sensor type, 57
serial communications, 64
setting through front panel, 50
start print signal, 70
time, 73
ZPL mode, 67
printhead
cleaning, 125
head close setting, 67
head resistor value setting, 69
pressure adjustment, 128
when to clean, 122
printing specifications, 153
proprietary statement, 173
protocol setting, 65