User's Manual Part 2

Print Engine Specifications
General Specifications
58981L-002 Rev. 1 2/11/05 R110PAX4 User Guide 151
Electrical Specifications
Communications Specifications
Memory
Power Supply Universal Power Supply with power-factor correcting
90–264 VAC, 48–62 Hz
Power Consumption
Idle
Printing
19 W
375 W (maximum)
Fuses 5 Amp, 250 VAC, 5 × 20 mm IEC style, as supplied with the print
engine
Parallel • Bi-directional high-speed (36-pin connector)
• IEEE 1284-compliant software protocol (standard)
Serial • Serial RS-232C with DTR hardware handshake via DB-9
connector (standard)
• Serial RS-422/485 via 2- or 4-wire with XON/XOFF
handshake on alternate pins of DB-9 connector (standard)
• Configurable baud rates from 110 to 57.6K baud with 7 or
8 data bits, standard parity, 1 or 2 stop bits
• Fused +5V @ 750 mA supplied at pin 9 of the DB-9 connector
Network Connections • ZebraNet 10/100 PrintServer
Applicator Interface
with DC15F
Connector
North America
Europe
5V I/O port
24-28V I/O port
Standard •10.0 MB RAM
•2.0 MB Flash
Flash Options • Up to 256 MB CompactFlash
• 32 MB PC memory card