User's Manual Part 2

Troubleshooting
Print Engine Diagnostics
58981L-002 Rev. 1 2/11/05 R110PAX4 User Guide 147
Delimiter Character Configuration, ZPL
ZPL Mode Configuration, ZPL
Media Power Up Configuration, ZPL
Head Close Configuration, ZPL
Backfeed Configuration, ZPL
Label Top Configuration, ZPL
Left Position Configuration, ZPL
Head Resistance Configuration (must match head resistance label value), ZPL
Verifier Port Configuration, ZPL
Applicator Port Configuration, ZPL
Start Print Signal Configuration, ZPL
Resynch Mode Configuration, ZPL
Ribbon Low Mode Configuration, ZPL
Reprint Mode Configuration, ZPL
Web Sensor Configuration, ZPL
Media Sensor Configuration, ZPL
Ribbon Sensor Configuration, ZPL
Mark Sensor Configuration, ZPL
Mark Media Sensor Configuration, ZPL
Media LED Configuration, ZPL
Ribbon LED Configuration, ZPL
Mark LED Configuration, ZPL
LCD Adjust Configuration
Modes Enabled ZPL
Modes Disabled ZPL
Resolution Fixed (head type switch)
Socket 1 ID Fixed
Firmware Fixed (code EPROMS)
Configuration Configuration
B:Memory Fixed (option card)
J12 Interface Fixed
Table 16 • Control of Print Engine Parameters (Continued)
Parameter Controlled By