User's Manual Part 2

Troubleshooting
Memory Errors
58981L-002 Rev. 1 2/11/05 R110PAX4 User Guide 135
Memory Errors
The memory errors in Table 12 indicate that the print engine does not have enough memory to
perform the function shown on the second line of the LCD.
Table 12 • Memory Errors
Problem/LCD Display Possible Cause Recommended Solution
Creating Bitmap
The bitmap size (label
length/width) does not fit in
available memory.
You may do any of the following:
1. Press PAUSE to place the print engine
in Pause mode.
2. Send a ~HM ZPL command to the
print engine to display the amount of
free memory. Then do one of the
following:
• Redesign graphic/format to fit
available memory or remove
items from memory to create
more space.
• Press
PAUSE to skip the
formatting step in process and
proceed to the next step.
3. In Pause mode, press CANCEL.
The print engine skips the current
label formatting process and goes to
the next label.
4. Turn the print engine Off (O) and then
On (
I) to clear the print engine’s
memory.
5. Upgrade the print engine to a larger
memory size.
Storing Bitmap
Not enough memory is
available to store the bitmap
created.
Building Format
Label is too complex.
Storing Format
Format is too large to fit in
available memory.
Storing Graphic
The graphic image is too large
to fit in available memory.
Storing Font
Not enough memory available
to store the font.
OUT OF MEMORY
CREATING BITMAP
OUT OF MEMORY
STORING BITMAP
OUT OF MEMORY
BUILDING FORMAT
OUT OF MEMORY
STORING FORMAT
OUT OF MEMORY
STORING GRAPHIC
OUT OF MEMORY
STORING FONT