User's Manual Part 1

10 R110PAX4 User Guide 58981L-002 Rev. 1 2/11/05
Print Engine Basics
Front Panel
Front Panel Indicator Lights (LEDs)
The front panel lights are described in Table 2.
CANCEL CANCEL functions only in Pause mode. Pressing CANCEL has these effects:
• Cancels the label format that is currently printing.
• If no label format is printing, the next one to be printed is canceled.
• If no label formats are waiting to be printed, CANCEL is ignored.
To clear the print engine’s entire label format memory, press and hold CANCEL
until the DATA light turns off.
FEED Feeds a blank label.
• If the print engine is idle or paused, the label is fed immediately.
• If the print engine is printing, the label is fed after the current batch finishes
printing.
CALIBRATE CALIBRATE functions only in Pause mode. Press CALIBRATE to recalibrate for
proper media length, to set media type (continuous/non-continuous), and to set print
method (direct thermal/thermal transfer).
Table 1 • Front Panel Buttons (Continued)
Button Description/Function
Table 2 • Front Panel Lights
LED OFF Indicates ON Indicates FLASHING Indicates
POWER
(Green)
Power switch is off, or
no power to print
engine.
Power switch is on, and power
is being supplied to print
engine.
—
PAUSE
(Yellow)
Normal operation. One of the following:
• Print engine paused because
of an error condition
(printhead, ribbon, or paper
error). Usually occurs in
conjunction with another
LED.
• PAUSE was pressed.
• A pause was requested from
the applicator port.
• A pause was received as part
of the label format.
—
DATA
(Green)
No data being received
or processed.
Data is processing or printing is
taking place. No data is being
received.
Print engine is receiving data
from or sending status
information to the host
computer.