User's Manual Part 1

Print Engine Basics
Front Panel
58981L-002 Rev. 1 2/11/05 R110PAX4 User Guide 9
Front Panel
All controls and indicators for the print engine are located on the front panel (Figure 4). The
Liquid Crystal Display (LCD) shows operating status and feature parameters. The front panel
buttons are used to control the print engine operations and to set parameters. The front panel
lights (LEDs) indicate the print engine’s status.
Figure 4 • Front Panel
Front Panel Buttons
The front panel buttons are described in Table 1.
1
Buttons
2
LCD
3
Lights/LEDs
2 1 31
Table 1 • Front Panel Buttons
Button Description/Function
BLACK OVALS The two black ovals are used to change values for the parameter displayed on the
LCD. Common uses include increasing or decreasing a value, answering YES or
NO, indicating ON or OFF, and scrolling through choices.
PREVIOUS Scrolls the LCD to the previous parameter.
NEXT Scrolls the LCD to the next parameter.
SETUP/EXIT Enters and exits Setup mode.
PAUSE Stops and restarts the printing process or removes error messages and clears the
LCD. When the print engine is paused, the PAUSE light is on.
• If the print engine is idle, it enters Pause mode immediately.
• If the print engine is printing, the label is completed before the printing process
stops.