User's Manual Part 2

130 R110PAX3 User Guide 9/7/2004 58981L-001 Rev. 1
Data Ports
Serial Port
DB-9 to DB-25 Connections
An interface adapter is required (Zebra part number 33109M) to connect the print engine’s
DB-9 interface to a DB-25 connector. A generic DB-25 adapter CAN be used, although the
+5 VDC signal source would not be passed through the adapter.
Figure 52 shows the connections required for the DB-9 to DB-25 interface.
Figure 52 • DB-9 to DB-25 Connections
Male DB-9 Adapter
Connector
(plugs into printer)
Female DB-25 Adapter
Connector
(plugs into cable)
NOTE: Pin 1 of DB-9 connector is unused and unterminated.
FG
TXD
RXD
RTS
DSR
SG
DTR
RXD
TXD
DTR
SG
DSR
RTS
CTS
+5 VDC
SIGNAL
2
3
4
5
6
7
8
9
1
2
3
4
6
7
9
20
+5 VDC
SIGNAL
5
CTS