User's Manual Part 2

Print Engine Specifications
Ribbon Specifications
58981L-001 Rev. 1 9/7/2004 R110PAX 3 User Guide 123
Ribbon Specifications
Media Unwind Force Steady State Must be uniform and must not exceed
2lb(907g)
Transient (Start/Stop) Must not exceed 4 lb (1814 g)
Media Rewind Force Applicator take-up pull tension must be uniform
from 1 to 4 lb (454 to 1818 g) and must not vary
more than ±20% during operation.
Thickness 4.5 microns
Width (wound coated side out) 1.0 in. to 4.2 in. (25.4 mm to 107 mm)
Maximum length 2955 ft (900 m)
Roll size
Inner core diameter
Maximum roll size
1.0 in. (25.4 mm)
4.2 in. (107 mm)