User's Manual Part 2

Routine Maintenance
Toggle Positioning
58981L-001 Rev. 1 9/7/2004 R110PAX 3 User Guide 95
Toggle Positioning
Proper toggle positioning is important for proper print quality. The toggle should be positioned
approximately midway across the width of the media.
To adjust the toggle, complete these steps:
1. See Figure 44. Loosen the position locking nut by rotating it to the left.
2. Slide the toggle to the desired position on the toggle shaft.
3. Finger tighten the position locking nut by rotating it to the right.
Figure 44 • Toggle Positioning
1
Toggle shaft
2
Position locking nut
2
1