User's Manual Part 2

94 R110PAX3 User Guide 9/7/2004 58981L-001 Rev. 1
Routine Maintenance
Clean Interior
4. See Figure 43. Using Zebra’s Preventative Maintenance kit (part number 47362) or a
solution of 90% isopropyl alcohol and 10% deionized water on a cotton swab, wipe the
print elements from end to end. Allow the solvent to evaporate.
Figure 43 • Printhead and Platen Roller Cleaning
5. Use a lint-free cloth moistened with alcohol to clean the platen roller and other rollers.
Rotate the rollers while cleaning.
6. Reload the ribbon and media (if used).
7. Turn On (I) the print engine.
1
Printhead elements (gray strip)
2
Cotton swab
3
Platen roller
Note • If print quality does not improve after you perform this procedure, clean the printhead
with Save-a-Printhead cleaning film. Call your authorized Zebra distributor for more
information.
3
1 2