User's Manual Part 2

Print Engine Operation
Print a Network Configuration Label
58981L-001 Rev. 1 9/7/2004 R110PAX 3 User Guide 45
Print a Network Configuration Label
If you are using a print server, you can print a network configuration label after the print
engine is connected to the network.
To print a network configuration label, complete these steps:
1. On the front panel, press SETUP/EXIT.
2. Use the left or right oval to scroll through the parameters until you reach LIST
NETWORK
.
3. Press the right oval to confirm printing.
A network configuration label prints (Figure 36).
Figure 36 • Network Configuration Label