User's Manual Part 2

72 R110PAX3 User Guide 9/7/2004 58981L-001 Rev. 1
Print Engine Configuration
Front Panel LCD
Perform RFID Test
In both versions of this test, the print engine attempts to read and write to a
transponder. In the slow test, the print engine also checks the reader
version number. If the print engine fails the test, the front panel displays an
error message.
1. Place an RFID tag over the reader (no movement occurs with the test).
2. Press SELECT to select the parameter.
3. Press MINUS (–) to select QUICK.
OR
Press
PLUS (+) to select SLOW.
4. If necessary, press PLUS (+) to select CONTINUE.
5. Press SELECT to deselect the parameter.
Show RFID Error Status
If an error condition exists, a message may be displayed here.
Select the Display Language
This parameter allows you to change the language displayed on the front
panel LCD.
• Press the right or left oval to display other choices.
Default: ENGLISH
Selections: ENGLISH, SPANISH, FRENCH, GERMAN, ITALIAN,
NORWEGIAN, PORTUGUESE, SWEDISH, DANISH, SPANISH 2,
DUTCH, FINNISH, JAPAN
Table 6 • Print Engine Parameters (Sheet 18 of 18)
Parameter Action/Explanation
RFID TEST
QUICK SLOW
RFID ERR STATUS
LANGUAGE
-ENGLISH +