User's Manual Part 2

60 R110PAX3 User Guide 9/7/2004 58981L-001 Rev. 1
Print Engine Configuration
Front Panel LCD
List Network Settings
This selection is used to print a network configuration label, which lists the
settings for any print server that is installed.
• Press the right oval to print a network configuration label.
List All
• Press the right oval to print labels that list the available fonts, bar codes,
images, formats, and the current print engine and network
configurations.
Initialize Memory Card
Caution • Perform this operation only when it is necessary to erase all
previously stored information from the optional PCMCIA card or
CompactFlash card.
1. Press the right oval to select YES. (If you are prompted to enter the
password, see Changing Password-Protected Parameters on page 54.
The front panel LCD asks
ARE YOU SURE?.
2. Do you wish to continue?
• Press the left oval to select
NO to cancel the request and return to
INITIALIZE CARD prompt.
• Press the right oval to select
YES and begin initialization.
When initialization is complete, the print engine automatically exits
Setup mode, and the front panel displays
PRINTER READY. If you
exit Setup mode while initialization is still in process, the front panel
display flashes between the phrases
CHECKING B: MEMORY and
PRINTER IDLE.
Note • Depending on the amount of memory in the memory card,
initialization may take up to 5 minutes to complete.
Table 6 • Print Engine Parameters (Sheet 6 of 18)
Parameter Action/Explanation
LIST NETWORK
PRINT
LIST ALL
PRINT
FORMAT CARD:
A: B: