User's Manual Part 1

Print Engine Operation
Load Media
58981L-001 Rev. 1 9/7/2004 R110PAX3 User Guide 35
6. See Figure 22. Thread the media under the upper guide post, below the pinch roller
assembly, and under the printhead assembly.
7. See Figure 22. Extend approximately 30 in. (75 cm) of media past the peel bar. Remove
and discard the labels from this exposed media.
Figure 22 • Threading the Media
1
Upper guide post
2
Pinch roller assembly
3
Printhead assembly
4
Label
5
Liner
1 2
3
4
5