User's Manual Part 1

Print Engine Basics
Front Panel
58981L-001 Rev. 1 9/7/2004 R110PAX3 User Guide 9
Front Panel
All controls and indicators for the print engine are located on the front of the print engine on
the front panel (Figure 3). The Liquid Crystal Display (LCD) shows operating status and
feature parameters. The front panel buttons are used to control the print engine operations and
to set parameters. The front panel lights (LEDs) indicate the print engine’s status.
Figure 3 • Front Panel
Front Panel Buttons
The front panel buttons are shown in Table 1.
1
Buttons
2
LCD
3
Lights/LEDs
2 1 31
Table 1 • Front Panel Buttons
Button Description/Function
BLACK OVALS The two black ovals are used to change values for the parameter displayed on the LCD.
Common uses include increasing or decreasing a value, answering yes or no, indicating
ON or OFF, and scrolling through choices.
PREVIOUS Scrolls the LCD to the previous parameter.
NEXT Scrolls the LCD to the next parameter.
SETUP/EXIT Enters and exits Setup mode.
PAUSE Stops and restarts the printing process or removes error messages and clears the LCD.
When the print engine is paused, the PAUSE light is on.
• If the print engine is idle, it enters Pause mode immediately.
• If the print engine is printing, the label is completed before the printing process
stops.
CANCEL CANCEL functions only in PAUSE mode. Pressing CANCEL has these effects:
• Cancels the label format that is currently printing.
• If no label format is printing, the next one to be printed is canceled.
• If no label formats are waiting to be printed, CANCEL is ignored.
To clear the print engine’s entire label format memory, press and hold CANCEL until
the DATA light turns off.