User's Manual
Table Of Contents
- Contents
- Preface
- Introduction
- Printer Setup
- Printer Operation
- Front Panel Controls
- RFID Guidelines
- Overview
- Getting Started with RFID
- Creating Basic RFID Label Formats
- RFID Label Format 1-Write a 96-bit Tag in Hexadecimal
- RFID Label Format 2-Write a 64-bit Tag in Hexadecimal
- RFID Label Format 3-Write a 96-bit Tag in ASCII
- RFID Label Format 4-Read Data from Tag and Print on Label
- RFID Label Format 5-Write Tag, Read Tag, and Print Data on Label
- RFID Label Format 6-Write Tag, Read Tag, and Return Results to Host
- ZPL II Commands for RFID
- Data Ports
- Memory Cards
- Routine Maintenance
- Troubleshooting
- Specifications
- Proprietary Statement
- Warranty Information
- Printer Software and Firmware License Agreement
- Index
Printer Operation
Loading Ribbon
23063L-003 Rev. A 6/24/05 R110Xi/R170Xi User Guide 29
5. See Figure 22. Thread the ribbon under the printhead and past the platen roller.
Figure 22 • Threading Ribbon Under the Printhead
6. Pull the ribbon leader over the printhead and above the top roller.
1
Ribbon leader
2
Top roller
3
Printhead
4
Platen roller
2
3
1
4