User's Manual
Table Of Contents
- Contents
- Preface
- Introduction
- Printer Setup
- Printer Operation
- Front Panel Controls
- RFID Guidelines
- Overview
- Getting Started with RFID
- Creating Basic RFID Label Formats
- RFID Label Format 1-Write a 96-bit Tag in Hexadecimal
- RFID Label Format 2-Write a 64-bit Tag in Hexadecimal
- RFID Label Format 3-Write a 96-bit Tag in ASCII
- RFID Label Format 4-Read Data from Tag and Print on Label
- RFID Label Format 5-Write Tag, Read Tag, and Print Data on Label
- RFID Label Format 6-Write Tag, Read Tag, and Return Results to Host
- ZPL II Commands for RFID
- Data Ports
- Memory Cards
- Routine Maintenance
- Troubleshooting
- Specifications
- Proprietary Statement
- Warranty Information
- Printer Software and Firmware License Agreement
- Index
28 R110Xi/R170Xi User Guide 23063L-003 Rev. A 6/24/05
Printer Operation
Loading Ribbon
4. Does your printer contain a ribbon dancer assembly?
If... Then...
No See Figure 20. Thread the ribbon under the ribbon guide roller.
Figure 20 • Loading Ribbon, No Dancer Assembly
Yes
a. See Figure 21. Thread the ribbon under the upper roller of the ribbon
dancer assembly and then over the lower roller.
b. Thread the ribbon under the ribbon guide roller.
Figure 21 • Loading Ribbon through the Dancer Assembly
1
1
Ribbon guide roller
1
2
3
1
Ribbon guide roller
2
Ribbon dancer assembly lower roller
3
Ribbon dancer assembly upper roller