User's Manual
Table Of Contents
- Contents
- Preface
- Introduction
- Printer Setup
- Printer Operation
- Front Panel Controls
- RFID Guidelines
- Overview
- Getting Started with RFID
- Creating Basic RFID Label Formats
- RFID Label Format 1-Write a 96-bit Tag in Hexadecimal
- RFID Label Format 2-Write a 64-bit Tag in Hexadecimal
- RFID Label Format 3-Write a 96-bit Tag in ASCII
- RFID Label Format 4-Read Data from Tag and Print on Label
- RFID Label Format 5-Write Tag, Read Tag, and Print Data on Label
- RFID Label Format 6-Write Tag, Read Tag, and Return Results to Host
- ZPL II Commands for RFID
- Data Ports
- Memory Cards
- Routine Maintenance
- Troubleshooting
- Specifications
- Proprietary Statement
- Warranty Information
- Printer Software and Firmware License Agreement
- Index
Printer Operation
Loading the Media
23063L-003 Rev. A 6/24/05 R110Xi/R170Xi User Guide 21
Load Roll Media
Roll media feeds through the printer from the media hanger or media supply spindle. Figure 12
identifies the components of the printer with which you need to be familiar to load roll media
in Tear-Off mode.
Figure 12 • Interior Components for Media Loading (Tear-Off Mode)
1
Printhead lever
2
Media guide
3
Media guide roller
4
Media guide on media hanger
5
Media hanger
1
2
4
5
3