User's Manual
Table Of Contents
- Contents
- Preface
- Introduction
- Printer Setup
- Printer Operation
- Front Panel Controls
- RFID Guidelines
- Overview
- Getting Started with RFID
- Creating Basic RFID Label Formats
- RFID Label Format 1-Write a 96-bit Tag in Hexadecimal
- RFID Label Format 2-Write a 64-bit Tag in Hexadecimal
- RFID Label Format 3-Write a 96-bit Tag in ASCII
- RFID Label Format 4-Read Data from Tag and Print on Label
- RFID Label Format 5-Write Tag, Read Tag, and Print Data on Label
- RFID Label Format 6-Write Tag, Read Tag, and Return Results to Host
- ZPL II Commands for RFID
- Data Ports
- Memory Cards
- Routine Maintenance
- Troubleshooting
- Specifications
- Proprietary Statement
- Warranty Information
- Printer Software and Firmware License Agreement
- Index
Index
23063L-003 Rev. A 6/23/05 R110Xi/R170Xi User Guide 169
troubleshooting
checklist, 126
communications problems, 132
LCD error messages, 127
print quality problems, 130
printer diagnostics, 134
wrinkled ribbon, 131
types of media
continuous roll media, 14
fanfold media, 15
non-continuous roll media, 14
RFID “smart” labels, 15
U
unpack the printer, 9
upper media sensor adjustment, 37
USB 2.0 port
location, 12
settings, 107
V
verifier port setting, 56
verify RFID write operation (^WV), 97
vertical lines on labels, 131
W
web media, 14
setting sensor type, 45
Web S. setting, 58
Wireless Print Server settings
authentication type, 61
default gateway, 61
encryption, 61
ESSID, 61
IP address, 60
IP protocol, 60
MAC address, 61
reset network, 61
subnet mask, 60
wrinkled ribbon, 131
write power
change through front panel, 63
change using ZPL, 93
write RFID format (^RF), 83
write RFID tag (^WT), 95
X
XML-enabled printing, 67
Z
Zebra Programming Language (ZPL II)
features, 140
RFID label formats, 69
RFID ZPL commands, 77
ZPL mode setting, 53
Zebra support, x