User's Manual

89
Configuration
Front Panel LCD Displays
12/2/05 XiIIIPlus/R110Xi/R170Xi User Guide 13383L-002 Rev. A
View or Change RFID Write Power
This parameter displays the current value for RFID write power.
Default: HI
Selections: HI, MED, LOW
To change the value shown:
1. Press the left or right oval to scroll through the options.
RFID Error Status
During an error condition, an error message shows on the second line of the
display. Refer to the RFID Programming Guide for more information about
the error messages. This field cannot be modified.
Specify RFID Tag Type
Select the RFID tag type that you are using. If the tag type is not listed, you
may not be able to use the labels with your printer.
Selections:
• CLASS 1 64-BIT
• CLASS 1 96-BIT
• ISO18000
• NONE
•CLASS 0
•CLASS 0+
•GEN2
To change the value shown:
1. Press the left or right oval to scroll through the options.
Table 9 • RFID Parameters (Sheet 3 of 4)
Parameter Action/Explanation
RFID WRITE PWR
HI
RFID ERR STATUS
RFID TAG TYPE