User's Manual

Table Of Contents

Configuration

Control Panel LCD Displays

12/2/05 XiIIIPlus/R110Xi/R170Xi User Guide 13383L-002 Rev. A

Select Media Power-Up Option

This parameter sets the action of the media when you turn on the printer.

Default: CALIBRATION

Selections: FEED, CALIBRATION, LENGTH, SHORT CAL, and NO

MOTION

• Feed—feeds the labels to the first registration point.

• Calibration—determines the length of the label and adjusts the

sensor settings.

• Length—In continuous mode, feeds the last stored label length. In

noncontinuous mode, calibrates based on the maximum label length

setting (see Set Maximum Label Length on page 61).

• Short Cal—calibrates label length using the current sensor settings.

• No Motion—the media does not move. You must press

FEED to

cause the printer to resynch to the start of the next label.

To change the value shown:

1. Press the left or right oval to scroll through the options.

Select Head Close Option

This parameter sets the action of the media when you close the printhead.