User's Manual

Operations
Loading Ribbon
38
13383L-002 Rev. A XiIIIPlus/R110Xi/R170Xi User Guide 12/2/05
Load Ribbon
To load the ribbon, complete these steps:
1. See Figure 24. Align the segments of the ribbon supply spindle.
Figure 24 • Ribbon Supply Spindle Segments
2. Place the roll of ribbon on the ribbon supply spindle, and push the core as far back as it
can go.
3. If the printhead is closed, open it using the printhead lever.
4. Does your printer contain a ribbon dancer assembly?
If... Then...
No See Figure 25. Thread the ribbon under the ribbon guide roller.
Figure 25 • Loading Ribbon, No Dancer Assembly
1
1
Ribbon guide roller