User's Manual

Operations
Loading Media
34
13383L-002 Rev. A XiIIIPlus/R110Xi/R170Xi User Guide 12/2/05
Load Fanfold Media
Fanfold media feeds through either the bottom or rear access slot from outside the printer. The
media hanger and media supply spindle are not used with fanfold media.
To load fanfold labels, complete these steps:
1. Slide the printhead lever to the Open position.
2. See Figure 18 on page 32. Slide the media guide away from the printer frame. You may
need to loosen the media guide screw.
3. How do you want to feed the fanfold labels?
• From the bottom slot in the printer body.
Figure 20 shows the printer with fanfold labels loaded through the bottom slot.
Figure 20 • Fanfold Media—Bottom Loading
• From the rear slot in the printer body.
Figure 21 shows the printer with fanfold labels loaded through the rear slot.
1
Printhead lever (shown in the Open
position)
2
Media guide
3
Fanfold labels
1
2
3