User's Manual

Operations
Loading Media
32
13383L-002 Rev. A XiIIIPlus/R110Xi/R170Xi User Guide 12/2/05
Figure 18 • Adjusting the Media Guide
3. Place the roll of media on the media hanger.
4. Push the media core toward the printer frame. Make sure that the labels are aligned with
the media core.
5. Adjust the media guide on the media hanger so it just touches but does not restrict the
media.
6. See Figure 19. Feed the media under the media guide roller and under the upper media
sensor assembly.
1
Media guide
2
Location of media guide thumb screw
3
Media guide on media hanger
4
Media hanger
Important • Be sure to thread the media under the upper media sensor assembly and the
ribbon guide roller. If you thread the media over these, the media blocks the ribbon sensor.
1
2
3
4