User's Manual

Routine Maintenance
Clean the Cutter
116
13383L-002 Rev. A XiIIIPlus/R110Xi/R170Xi User Guide 12/2/05
Clean the Cutter
If the cutter is not cutting the labels cleanly or if it jams with labels, clean the cutter.
To clean the cutter, complete these steps:
1. Turn Off (O) the printer.
2. Unplug the power cord.
3. Clean the stationary cutter blade with solvent.
If this does not remove label fragments and adhesive, contact an authorized service
technician.
Caution • The cutter blade is sharp. Do not touch or rub the blade with your fingers.