User's Manual

97
Print Modes and Options
Print Modes
12/2/05 XiIIIPlus/R110Xi/R170Xi User Guide 13383L-002 Rev. A
Figure 42 • Rewind Plate
To set up the printer in Rewind mode, complete these steps:
1. If you have not already done so, install the rewind plate.
2. From the control panel, select Rewind mode.
3. Open the printhead.
4. Slide the media guide and media supply guide as far from the printer frame as possible.
Flip down the media supply guide.
5. Put the roll of media on the media hanger.
6. Push the label core toward the printer frame. The labels must be aligned with the label
core.
7. Feed the media under the media guide roller and under the printhead.
8. Adjust the media supply guide so it is just touching the edge of the media.
1
Slots
2
Rewind plate
3
Lip
4
Adjustable hook plate
2
3
1
4