User's Manual

Configuration
Front Panel LCD Displays
90
13383L-002 Rev. A XiIIIPlus/R110Xi/R170Xi User Guide 12/2/05
Read and Display RFID Tag Data
When this option is selected, the reader attempts to read a tag over the
RFID antenna, even if the printhead is open. Results are displayed in
hexadecimal format. The printer rereads the tag every 2 seconds, so if the
tag changes, data is displayed for the current tag over the antenna.
To read RFID tag data:
1. Place an RFID label over the antenna (no movement occurs with the
test).
• If no tag data can be read, the text
NO DATA appears on the bottom
line of the LCD display.
• If a tag is present, the data for that tag appears on the bottom line of
the display in hexadecimal format. If there is more data than can fit on
the bottom line (such as for 96-bit tags), the bottom line will cycle
from the first 8 bytes (most significant) to the next 4 bytes (least
significant) approximately every 2 seconds. Whatever hexadecimal
data that can fit on two screens is displayed and cycled through.
For example, if the tag contains the data
0x112233445566778899001122, when this option is selected,
the bottom line of the display shows:
1122334455667788 for 2
seconds followed by
99001122 for 2 seconds. The printer cycles
through these indefinitely.
Table 9 • RFID Parameters (Sheet 4 of 4)
Parameter Action/Explanation
RFID TAG DATA