Programmer's Guide

RaDeKL Radar API Programmer’s Guide 2

7. Windows 2000:

a. Click “Search for a suitable driver for my device”. Click “Next”.

b. Check the box “Specify a location”. Click “Next”.

c. Click “Browse” and navigate to the folder noted in step 2 and then down to the “Driver”

folder. Select the file named “FTDIBUS.inf” and click “OK” and then “Next”.

d. The driver will install. Windows will then detect a second USB device and the driver will

install automatically.

8. Note: The additional USB device installed represents an unused internal port on the USB chip. This

port is not used by RaDeKL Radar and can be entirely ignored. However, during driver installation,

Windows will detect this unused port and insist on installing a driver for it.

9. The RaDeKL Radar is now ready for use. The driver needs to be installed only once for each PC. If

it ever needs to be upgraded, use the Windows Device Manager, ensuring that the radar device is

physically plugged in and powered up.