User's Manual

30 QL 420 User’s Guide
Using the Accessories
Belt Clip
Refer to Figure 14.The QL 420
is equipped with a belt clip. To
use: hook the clip over your belt,
and ensure that the clip is se-
curely attached to the belt. The
belt clip will pivot to allow you to
move freely while wearing the
printer.
Adjustable Shoulder
Strap
Refer to Figure 15. If
your printer is equipped
for the shoulder strap op-
tion: snap each end of
the shoulder strap into
the “D” rings in the top of
the printer. Slide the
buckle away from or to-
wards the printer until you
achieve the desired
length.
FIGURE 15: OPTIONAL SHOULDER STRAP
Hold Buckle
Pull Strap here
to lengthen
Pull Strap here
to shorten
Snap in to “D”
rings on printer
Clip printer to
belt
Printer can
pivot freely
FIGURE 14: THE QL 420 BELT CLIP