User's Manual

10 P430i User’s Manual 980470-001 Rev. A

Installation and Setup

Installing the Print Driver Software and Setting Driver Options

d. Remove the print head protection pad. Keep the pad, as well as the other packing material and the

shipping carton, in case the printer is shipped or moved. If the original material is lost, a replacement

Shipping Kit can be ordered from your reseller.

Installing the Print Driver Software and Setting Driver

Options

Printing with the P430i Printer requires the Windows Printer Driver and your card design/issuing software or

printer command level programming through the printer interface.

The P430i Card Printer can be used with any Windows 2000 or Windows XP computer, using the drivers

provided on CD with the printer.

This section contains information on the printing of a sample card in color (using the 5-panel color ribbon

YMCKO and the Windows Printer Driver).

Installing the P430i Print Driver

To install the P430i Printer Driver automatically on all Operating Systems, use the Zebra Install Wizard.

The Install Wizard will walk you through the appropriate installation steps. The Wizard will:

• Automatically launch when the driver CD is inserted.

• From the main menu of your documentation CD, select your desired language and then select “DRIVERS”

from the subsequent menu. The Install Wizard will walk you through the appropriate steps.

Note • If updating the printer driver from a previous version, before installing the updated

printer driver version, always delete the existing version from your computer.

Note • Ensure that you have administrative privileges to perform this installation, or contact

your IT department.

al-Si

ed C

olor