User's Manual

38 P100i User’s Manual 980590-001 Rev. A Draft 1
Cleaning
Cleaning System
4. After the ribbon is removed and the lid is closed, the message EMPTY FEEDER THEN
CLOSE COVER will display.
5. If the lid is opened and closed without removing the ribbon, the REMOVE RIBBON
THEN CLOSE LID message will remain.
6. Once the cover is closed, the firmware will eject any card inside the printer. The message
EJECTING CARD will display.
7. The LCD will then display FEED LONG CLEANING CARD IN EXIT. When the card
sensor registers the presence of the cleaning card, the rollers should take the card into the
printer.
8. When the cleaning process is done, the printer will eject the cleaning card. If the card
sensor still senses the cleaning card, the message REMOVE LONG CLEANING CARD
will display.
9. After the card is removed, the LCD will display READY. You may now reload the ribbon
and continue printing.
Printer Path
Cleaning Card
Multi-Function
Control Button
Multi-Function
LCD Panel